Jan 21 - 24, 2020
All classes begin at 8:30A
![]() |
Controls - Greengate Commissioning Certification
4-Day Workshop
-
$1500.00
This four day long course will focus on the Greengate line of lighting panels and sensors which are used to implement desired control strategies. Participants will gain an understanding of the various systems which include; Room Controller, LiteKeeeper, ControlKeeper, ControlKeeper T and ControlKeeper M. The class begins with an overview of the various sensor offerings and how they are commissioned for use with our panels. The students then progress on to setup, wiring, sensor integration and programming of each panel type using the Keeper Enterprise software package. Programming labs are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. Greengate lighting control panels offer stand-alone, networkable, centralized, and distributed solutions for projects of varying sizes, control requirements, and load types. The energy saving capabilities of these cost-effective panels allow for effective code compliance with any control strategy. Some panels allow for programming via onboard user interface, and all panels are programmable via the Keeper Enterprise software package.
Tuition Includes: Commissioning hardware and programming software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; Transportation to the airport at the conclusion of the workshop; Dinner the first evening; Participants are responsible for transportation from the airport to Peachtree City, Georgia, Hotel and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration. |
Feb 3 - 7, 2020
All classes begin at 8:30A
![]()
Class is Full
|
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
Feb 19 - 21, 2020
![]() |
Controls Specialist Workshop 2020
$600.00
This three day workshop will cover Cooper Lighting Solution's Controls product offerings from basic sensors to advanced systems. Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications. Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family. Who should attend: Controls Specialists who want an overview of Cooper Lighting Solution’s Controls, and who will be performing take-offs, quotation, submittal services and everyone who needs a starting point for our Connected solutions. Recommended courses: http://aboutlightingcontrols.org/EducationExpress/ Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighting Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. |
Mar 26 - 27, 2020
Thu 8am-5pm, Fri 8am-3:30pm
![]() |
Controls -WaveLinx Commissioning Certification
2 day Workshop
-
$1200.00
WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system. This course will provide you with a quick review of connected lighting and the installation, setup, and programming of Eaton’s WaveLinx Wireless Connected Lighting System. WaveLinx is designed with security and luminaire compatibility in mind from day one. Designed to save energy, WaveLinx provides superior code compliance and energy saving sequences while reducing installation. WaveLinx also offers beneficial control flexibility with a simple to use WaveLinx Mobile App to configure area and zone daylight, occupancy and scene controls.
Tuition Includes: Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Eaton's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. Thank you for your cooperation and consideration.
|
Apr 20 - 24, 2020
All classes begin at 8:30A
![]() |
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
May 5 - 8, 2020
All classes begin at 8:30A
![]() |
Controls - Greengate Commissioning Certification
4-Day Workshop
-
$1500.00
This four day long course will focus on the Greengate line of lighting panels and sensors which are used to implement desired control strategies. Participants will gain an understanding of the various systems which include; Room Controller, LiteKeeeper, ControlKeeper, ControlKeeper T and ControlKeeper M. The class begins with an overview of the various sensor offerings and how they are commissioned for use with our panels. The students then progress on to setup, wiring, sensor integration and programming of each panel type using the Keeper Enterprise software package. Programming labs are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. Greengate lighting control panels offer stand-alone, networkable, centralized, and distributed solutions for projects of varying sizes, control requirements, and load types. The energy saving capabilities of these cost-effective panels allow for effective code compliance with any control strategy. Some panels allow for programming via onboard user interface, and all panels are programmable via the Keeper Enterprise software package.
Tuition Includes: Commissioning hardware and programming software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; Transportation to the airport at the conclusion of the workshop; Dinner the first evening; Participants are responsible for transportation from the airport to Peachtree City, Georgia, Hotel and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration. |
Jun 3 - 5, 2020
![]() |
Controls Specialist Workshop 2020
$600.00
This three day workshop will cover Cooper Lighting Solution's Controls product offerings from basic sensors to advanced systems. Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications. Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family. Who should attend: Controls Specialists who want an overview of Cooper Lighting Solution’s Controls, and who will be performing take-offs, quotation, submittal services and everyone who needs a starting point for our Connected solutions. Recommended courses: http://aboutlightingcontrols.org/EducationExpress/ Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighting Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. |
Jun 8 - 12, 2020
All classes begin at 8:30A
![]() |
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
Jun 25 - 26, 2020
Thu 8am-5pm, Fri 8am-3:30pm
![]() |
Controls -WaveLinx Commissioning Certification
2 day Workshop
-
$1200.00
WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system. This course will provide you with a quick review of connected lighting and the installation, setup, and programming of Eaton’s WaveLinx Wireless Connected Lighting System. WaveLinx is designed with security and luminaire compatibility in mind from day one. Designed to save energy, WaveLinx provides superior code compliance and energy saving sequences while reducing installation. WaveLinx also offers beneficial control flexibility with a simple to use WaveLinx Mobile App to configure area and zone daylight, occupancy and scene controls.
Tuition Includes: Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Eaton's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. Thank you for your cooperation and consideration.
|
Aug 13 - 14, 2020
Thu 8am-5pm, Fri 8am-3:30pm
![]() |
Controls -WaveLinx Commissioning Certification
2 day Workshop
-
$1200.00
WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system. This course will provide you with a quick review of connected lighting and the installation, setup, and programming of Eaton’s WaveLinx Wireless Connected Lighting System. WaveLinx is designed with security and luminaire compatibility in mind from day one. Designed to save energy, WaveLinx provides superior code compliance and energy saving sequences while reducing installation. WaveLinx also offers beneficial control flexibility with a simple to use WaveLinx Mobile App to configure area and zone daylight, occupancy and scene controls.
Tuition Includes: Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Eaton's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. Thank you for your cooperation and consideration.
|
Aug 17 - 21, 2020
All classes begin at 8:30A
![]() |
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
Sep 22 - 25, 2020
All classes begin at 8:30A
![]() |
Controls - Greengate Commissioning Certification
4-Day Workshop
-
$1500.00
This four day long course will focus on the Greengate line of lighting panels and sensors which are used to implement desired control strategies. Participants will gain an understanding of the various systems which include; Room Controller, LiteKeeeper, ControlKeeper, ControlKeeper T and ControlKeeper M. The class begins with an overview of the various sensor offerings and how they are commissioned for use with our panels. The students then progress on to setup, wiring, sensor integration and programming of each panel type using the Keeper Enterprise software package. Programming labs are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. Greengate lighting control panels offer stand-alone, networkable, centralized, and distributed solutions for projects of varying sizes, control requirements, and load types. The energy saving capabilities of these cost-effective panels allow for effective code compliance with any control strategy. Some panels allow for programming via onboard user interface, and all panels are programmable via the Keeper Enterprise software package.
Tuition Includes: Commissioning hardware and programming software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; Transportation to the airport at the conclusion of the workshop; Dinner the first evening; Participants are responsible for transportation from the airport to Peachtree City, Georgia, Hotel and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration. |
Oct 15 - 16, 2020
Thu 8am-5pm, Fri 8am-3:30pm
![]() |
Controls -WaveLinx Commissioning Certification
2 day Workshop
-
$1200.00
WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system. This course will provide you with a quick review of connected lighting and the installation, setup, and programming of Eaton’s WaveLinx Wireless Connected Lighting System. WaveLinx is designed with security and luminaire compatibility in mind from day one. Designed to save energy, WaveLinx provides superior code compliance and energy saving sequences while reducing installation. WaveLinx also offers beneficial control flexibility with a simple to use WaveLinx Mobile App to configure area and zone daylight, occupancy and scene controls.
Tuition Includes: Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Eaton's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. Thank you for your cooperation and consideration.
|
Oct 26 - 30, 2020
All classes begin at 8:30A
![]() |
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
Nov 18 - 20, 2020
![]() |
Controls Specialist Workshop 2020
$600.00
This three day workshop will cover Cooper Lighting Solution's Controls product offerings from basic sensors to advanced systems. Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications. Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family. Who should attend: Controls Specialists who want an overview of Cooper Lighting Solution’s Controls, and who will be performing take-offs, quotation, submittal services and everyone who needs a starting point for our Connected solutions. Recommended courses: http://aboutlightingcontrols.org/EducationExpress/ Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighting Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. |
Dec 3 - 4, 2020
Thu 8am-5pm, Fri 8am-3:30pm
![]() |
Controls -WaveLinx Commissioning Certification
2 day Workshop
-
$1200.00
WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system. This course will provide you with a quick review of connected lighting and the installation, setup, and programming of Eaton’s WaveLinx Wireless Connected Lighting System. WaveLinx is designed with security and luminaire compatibility in mind from day one. Designed to save energy, WaveLinx provides superior code compliance and energy saving sequences while reducing installation. WaveLinx also offers beneficial control flexibility with a simple to use WaveLinx Mobile App to configure area and zone daylight, occupancy and scene controls.
Tuition Includes: Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Eaton's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued. Thank you for your cooperation and consideration.
|
Dec 14 - 18, 2020
All classes begin at 8:30A
![]() |
Controls - iLumin Plus Commissioning Certification
5-Day Workshop
-
$1500.00
This five-day long workshop will focus on the iLumin Plus lighting control system. Participants will gain an understanding of the iLumin Plus panels and accessories. The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming. Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. iLumin Plus is one single lighting control solution for all traditional wired control application needs. This DIN Rail based lighting control system is capable of supporting energy management, code compliance, DMX lighting and individual addressable lighting control applications, all from a single platform. Each panel configuration is fully networkable and commissioned via the iCANSuite software package.
Tuition Includes: Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses. Prerequisites Cooper Lighting Solution's Controls Specialist course or equivalent knowledge. Seminar Offered:
Note: This course may contain information specific to the products of Cooper Lighitng Solutions. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.
Thank you for your cooperation and consideration.
|
- or -
From Hartsfield Airport / Atlanta downtown south:
|