SOURCE Lighting Education Center Registration
Jan 23 - 25, 2019
All classes begin at 8:30A
Class is Full
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Feb 5 - 7, 2019
All classes begin at 8:30A
Controls -WaveLinx Commissioning Certification
3 day Workshop - $1200.00

Eaton's WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system.  This course will provide you with a quick review of connected lighting and the installation, setup, and programming of  Eaton’s WaveLinx Wireless Connected Lighting System.

Note the first day of the workshop begins at 2:00 p.m. and the last day concludes at 1:00 p.m.  Please make flight reservations after 3:30 p.m.

Prerequisites                

  • E-Learning modules

Seminar Offered:

  • Feb 5-7
  • Apr  9-11
  • Jul   9-11
  • Nov  5-7
Feb 13 - 15, 2019
All classes begin at 8:30A
Controls Specialist Workshop
3 Day Workshop - $600.00

This three day course will cover Eaton’s Controls product offerings from  basic sensors to advanced systems.  Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications.

Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family.

Who should attend: Controls Specialists who want an overview of Eaton’s controls solutions, and who will be performing take-offs, quotation and submittal services.

Prerequisites: eLearning modules to complete prior to attendance.

Seminar Offered:

  • Feb 13-15
  • Jun    5-7
  • Oct    9-11

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Feb 25 - Mar 1, 2019
All classes begin at 8:30A
Class is Full
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Mar 12 - 15, 2019
All classes begin at 8:30A
Class is Full
Controls - Greengate Commissioning Certification
4-Day Workshop - $1200.00

This four day long course will focus on the GreenGate line of lighting panels and sensors which are used to implement the desired control strategies for the customer.   Participants will gain an understanding of the various systems which include; Room Controller, LiteKeeeper, ControlKeeper, ControlKeeper T and ControlKeeper M.  The class begins with an overview of the various sensor offerings and how they are commissioned for use with our panels.  The students then progress on to setup, wiring, sensor integration and programming of each panel type using the Keeper Enterprise software package.  Throughout the classes, programming labs are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

 

Tuition Includes:  Commissioning hardware and programming software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; Transportation to the airport at the conclusion of the workshop; Dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel and other expenses.

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • May  7-10 
  • Sep  10-13 

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Mar 13 - 15, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Apr 9 - 11, 2019
Class begin at 2:00 pm the first day.
Controls -WaveLinx Commissioning Certification
3 day Workshop - $1200.00

Eaton's WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system.  This course will provide you with a quick review of connected lighting and the installation, setup, and programming of  Eaton’s WaveLinx Wireless Connected Lighting System.

Note the first day of the workshop begins at 2:00 p.m. and the last day concludes at 1:00 p.m.  Please make flight reservations after 3:30 p.m.

Prerequisites                

  • E-Learning modules

Seminar Offered:

  • Feb 5-7
  • Apr  9-11
  • Jul   9-11
  • Nov  5-7
Apr 10 - 11, 2019
All classes begin at 8:30A
Healthcare Workshop
2-Day Workshop - $450.00

This two-day workshop presents topics critical to lighting healthcare facilities for attendees new to this discipline - or those wanting a quick refresher course.  The basics of lighting and designing challenging healthcare projects will be addressed. Basic applications and trends in lighting patient and treatment specific areas will be discussed, as well as physiological, sustainable considerations and design tools used in designing these spaces.  A design project will allow participants to utilize their new skills on the second day.

CEUs:  up to 5 hours available.

Prerequisites:  Lighting Fundamentals or a firm understanding of lighting basics and terminology is required for this course.

Seminar Offered:  

  • Jul 13-14

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Apr 22 - 26, 2019
All classes begin at 8:30A
Class is Full
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Apr 24 - 26, 2019
All classes begin at 8:30A
LEDs, Connected Lighting and Retrofits for Energy Efficient Solutions
3-Day Workshop - $600.00

This three day workshop class will focus on the latest energy saving strategies through lighting and control strategies for industrial, commercial, warehousing, and exterior environments.  Participants will gain an understanding of the advantages of the latest in connected lighting and control technologies including multiple benefits that LED technology offers. Various applications will be discussed by allowing the participant to gain knowledge on how to identify and recommend energy saving lighting systems. Both new installations and retrofits will be discussed based on budget, energy consumption and installed costs. Codes and standards in addition to lighting legislation, including EPACT, LEED, ASHRAE 90.1, IECC, will be discussed as well as how to identify and utilize rebate programs that help to speed adoption of these products into the various applications where energy savings is a driving factor.

Focus:

  • Energy Legislation and Rebates
  • Advancement of energy saving systems and LEDs 
  • Connected lighitng control systems
  • Proper criteria to select the appropriate lighting and controls products to increase energy savings
  • Case study project

CEUs:  up to 12 hours available

Prerequisites:  Lighting Fundamentals or a firm understanding of lighting basics and terminology is required for this course.

Seminar Offered

  • Apr 24-26
  • Aug 21-23

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

May 8 - 10, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Jun 5 - 7, 2019
All classes begin at 8:30A
Controls Specialist Workshop
3 Day Workshop - $600.00

This three day course will cover Eaton’s Controls product offerings from  basic sensors to advanced systems.  Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications.

Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family.

Who should attend: Controls Specialists who want an overview of Eaton’s controls solutions, and who will be performing take-offs, quotation and submittal services.

Prerequisites: eLearning modules to complete prior to attendance.

Seminar Offered:

  • Feb 13-15
  • Jun    5-7
  • Oct    9-11

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Jun 17 - 21, 2019
All classes begin at 8:30A
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Jun 19 - 21, 2019
All classes will start at 8:30 am
Lighting Fundamentals/Lighting Basics (Agents Only)
Three-Day Course - $600.00

Intended for Eaton agents only, this three-day class will focus on Eaton Lighting and controls, performance and competitive differences.  This workshop will allow new agents to actively apply skills learned during each session.  This introductory level class will cover lighting terminology, photometry, LEDs, fixture types and an introduction to lighting controls.  The third day of the class will be focused on spending time with the customer service, technical and applications departments. 

Focus

  • Light Sight and Color
  • LED's and Drivers
  • Lamps & Ballasts
  • Cost of Light
  • Lighting Terminology
  • Controls
  • Specification Sheets
  • Optical Control
  • Luminaires
  • Specification Products

CEUs: up to 20 hours available

Prerequisites:  No prior experience in lighting is required. Participants must be Eaton agents to register for this course.

Seminar Offered:

  • Sep 11-13

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Jul 9 - 11, 2019
Class begin at 2:00 pm the first day.
Controls -WaveLinx Commissioning Certification
3 day Workshop - $1200.00

Eaton's WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system.  This course will provide you with a quick review of connected lighting and the installation, setup, and programming of  Eaton’s WaveLinx Wireless Connected Lighting System.

Note the first day of the workshop begins at 2:00 p.m. and the last day concludes at 1:00 p.m.  Please make flight reservations after 3:30 p.m.

Prerequisites                

  • E-Learning modules

Seminar Offered:

  • Feb 5-7
  • Apr  9-11
  • Jul   9-11
  • Nov  5-7
Aug 5 - 9, 2019
All classes begin at 8:30A
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Aug 7 - 9, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Aug 21 - 23, 2019
All classes begin at 8:30A
LEDs, Connected Lighting and Retrofits for Energy Efficient Solutions
3-Day Workshop - $600.00

This three day workshop class will focus on the latest energy saving strategies through lighting and control strategies for industrial, commercial, warehousing, and exterior environments.  Participants will gain an understanding of the advantages of the latest in connected lighting and control technologies including multiple benefits that LED technology offers. Various applications will be discussed by allowing the participant to gain knowledge on how to identify and recommend energy saving lighting systems. Both new installations and retrofits will be discussed based on budget, energy consumption and installed costs. Codes and standards in addition to lighting legislation, including EPACT, LEED, ASHRAE 90.1, IECC, will be discussed as well as how to identify and utilize rebate programs that help to speed adoption of these products into the various applications where energy savings is a driving factor.

Focus:

  • Energy Legislation and Rebates
  • Advancement of energy saving systems and LEDs 
  • Connected lighitng control systems
  • Proper criteria to select the appropriate lighting and controls products to increase energy savings
  • Case study project

CEUs:  up to 12 hours available

Prerequisites:  Lighting Fundamentals or a firm understanding of lighting basics and terminology is required for this course.

Seminar Offered

  • Apr 24-26
  • Aug 21-23

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Sep 10 - 13, 2019
All classes begin at 8:30A
Controls - Greengate Commissioning Certification
4-Day Workshop - $1200.00

This four day long course will focus on the GreenGate line of lighting panels and sensors which are used to implement the desired control strategies for the customer.   Participants will gain an understanding of the various systems which include; Room Controller, LiteKeeeper, ControlKeeper, ControlKeeper T and ControlKeeper M.  The class begins with an overview of the various sensor offerings and how they are commissioned for use with our panels.  The students then progress on to setup, wiring, sensor integration and programming of each panel type using the Keeper Enterprise software package.  Throughout the classes, programming labs are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

 

Tuition Includes:  Commissioning hardware and programming software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; Transportation to the airport at the conclusion of the workshop; Dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel and other expenses.

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • May  7-10 
  • Sep  10-13 

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Sep 11 - 13, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Oct 9 - 11, 2019
All classes begin at 8:30A
Controls Specialist Workshop
3 Day Workshop - $600.00

This three day course will cover Eaton’s Controls product offerings from  basic sensors to advanced systems.  Students will receive a comprehensive overview of of integrated and wireless systems as well as an understanding of their application. Wiring and installation details and overall functionality will also be highlighted within the discussed applications.

Participants will partake in a hands-on workshop focusing on how to apply the various controls solutions to projects, focusing on performing take-offs, determining bills of material and using available tools to complete a quote and provide submittals for each product family.

Who should attend: Controls Specialists who want an overview of Eaton’s controls solutions, and who will be performing take-offs, quotation and submittal services.

Prerequisites: eLearning modules to complete prior to attendance.

Seminar Offered:

  • Feb 13-15
  • Jun    5-7
  • Oct    9-11

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Oct 21 - 25, 2019
All classes begin at 8:30A
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Oct 23 - 25, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Nov 5 - 7, 2019
Class begin at 2:00 pm the first day.
Controls -WaveLinx Commissioning Certification
3 day Workshop - $1200.00

Eaton's WaveLinx Wireless Connected Lighting system combines power, lighting, connectivity, and software in a wireless lighting control system.  This course will provide you with a quick review of connected lighting and the installation, setup, and programming of  Eaton’s WaveLinx Wireless Connected Lighting System.

Note the first day of the workshop begins at 2:00 p.m. and the last day concludes at 1:00 p.m.  Please make flight reservations after 3:30 p.m.

Prerequisites                

  • E-Learning modules

Seminar Offered:

  • Feb 5-7
  • Apr  9-11
  • Jul   9-11
  • Nov  5-7
Nov 7 - 8, 2019
All classes begin at 8:30A
LED Exterior Lighting Solutions
2-Day Seminar - $450.00

LEDs have changed the way we illuminate the nighttime environment. This two-day course will cover LEDs in detail as a source to consider for exterior applications based on their long life, extended maintenance cycle, lower energy consumption, and optical capabilities. Participants will study exterior lighting design and principles for nighttime applications such as roadway, parking lots, area site lighting, sports lighting and evaluate the operating characteristics of fixtures designed for specific exterior applications. Exterior lighting legislation such as the Model Lighting Ordinance, BUG Rating, and testing methodologies (LM79, LM80, and TM21) will be covered. This course is ideal for those involved in the design/specification or the energy management of exterior spaces, and for those looking to gain a better understanding of what to use in their unique applications.

Focus:

  • Effect of color in the nighttime environment
  • Exterior lighting legislation, BUG ratings
  • Practical application of TM21, LM79, and  LM80
  • IES Recommended Lighting Practice for Roadway, Parking Lots & Garages, and Exterior Environments
  • Exterior sports lighting overview
  • Criteria for proper equipment selection

CEUs:  up to 10 hours available

Prerequisites:  Lighting Fundamentals or a firm understanding of lighting basics and terminology is required for this course.

Seminar Offered

  • Mar 7-8
  • Nov 7-8

 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Dec 2 - 6, 2019
All classes begin at 8:30A
Controls - iLumin Plus Commissioning Certification
5-Day Workshop - $1200.00

This five-day long course will focus on the iLumin Plus lighting control system.  Participants will gain an understanding of the iLumin Plus panels and accessories.  The classes start off with an introduction to iLumin Plus components and progress on to set up, panel wiring, accessory wiring, and programming.  Throughout the course, programming labs and demonstrations are used to fortify course material and to help foster teamwork amongst the group when solving simulated lighting scenarios. 

Tuition Includes:  Commissioning hardware/software ($500 value) Breakfast and Lunch Daily; Transportation from Group hotel to the SOURCE daily; transportation to the airport at the conclusion of the course; and dinner the first evening; Participants are responsible for transportation to Peachtree City, Georgia, Hotel costs and other expenses.

Prerequisites

Eaton's Controls Specialist course or equivalent knowledge.

 Seminar Offered:

  • Jan 7-11
  • Feb 25 - Mar 1
  • Apr  22-26
  • Jun 17-21
  • Aug 5-9
  • Oct 21-25
  • Dec 2-6 

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

 

Dec 4 - 6, 2019
All classes begin at 8:30A
Lighting Fundamentals/Lighting Basics
3-Day Workshop - $600.00

This three-day workshop focuses on the fundamentals of lighting, which includes lighting technologies such as LEDs, lamp and ballast systems, lighting terminology, fixture types, cost of light, photometry and an introduction to lighting controls. Participants will be able to actively engage and apply skills learned throughout each session while interacting with instructors and classmates. Lighting Fundamentals is not only a course for those new to the lighting industry but also a refresher course for those who are looking to re-establish the basics of their lighting knowledge.

Focus:

  • Light, Sight, and Color
  • LED and Traditional Light Sources
  • Cost of Light
  • Lighting Terminology
  • Photometry
  • Optical Control
  • Luminaires
  • Lighting Controls and Connected Lighting Introduction
  • Incentives, payback calculators, and web tools

Prerequisites: No prior experience in lighting is required.

CEUs: Up to 20 hours available  

Seminar Offered:

  • Feb     6-8
  • Mar   13-15
  • May    8-10
  • Aug     7-9
  • Sep   11-13
  • Oct    23-25
  • Dec     4-6

Note:  This course may contain information specific to the products of Eaton's Lighting Division and/or the subsidiaries of Eaton. As such, our policy prohibits representatives of competing brands from attending SOURCE classes (in Peachtree City or remote locations). Attendees who fall within this category will respectfully be asked to depart and refunds will not be issued.

Thank you for your cooperation and consideration.

Other Programs Available at the Source
In addition to the courses described in this calendar, the Source offers programs to answer your questions regarding lighting systems and provide timely updates of recent developments and technologies in the lighting industry. To schedule any of these programs, or to customize a program for your group, contact The Source or your local Eaton Representative.
Continuing Education Credits (CEU)
This nationally recognized measurement of accomplishment may be obtained for attendees by submitting the course agenda along with a letter from Eaton verifying your attendance. The number of CEU credits varies from issuing organizations.
Industry Organizations
The Source and its knowledgeable staff can provide an informative program for your organization's monthly meeting. To customize a program for you group, contact The Source or your local Eaton Representative.
A Source for Project Ideas
A simple way to review the latest technology available for a specific application. The Source can be a valuable resource in assisting the designer or engineer, or helping the owner or client to visualize any lighting solution.
Email:  TheSource@Eaton.com

The Source is located at 1121 Highway 74 South, Peachtree City, GA 30269. Course Information: (770) 486-4800, Fax: (770) 486-4318.
Directions to the Source . . . via MapQuest
- or -
From Hartsfield Airport / Atlanta downtown south:
1. Travel Northeast on Airport South Terminal Parkway towards Airport Blvd. (0.9 mi.)
2. Take I-85 South towards Montgomery (1 mi.) Continue South on I-85 (11.1 mi.)
3. Take Exit Number 61 (Highway 74 exit Fairburn/Peachtree City), and turn Left
(south) continuing across the I-85 overpass.
(0.2 mi.)
4. Continue straight on GA 74 going South towards Senoia and Peachtree City
Remain on GA 74 through Peachtree City
(18.0 mi.)
5. The main entrance to Eaton will be on your right.
1121 Highway 74 South, Peachtree City, GA, 30269-3019.